Prg Vx76 User Manual 3.6 Manual do Utilizador descarregar pdf (Página 277)

VX76 SOFTWARE USER MANUAL 261

Selective Recall

The Selective Recall feature is used to recall specific parameter data from specified channels (

active

inactive

) in a

cue, preset, or beam state.

Guidelines:

+ Selective Recall routes through the filter settings.

+ If Timing is selected at the touchscreen filter, then the parameter

and

all timing information will be recalled (making

that the current state).

+ If Timing is

not

selected at the touchscreen filter, then only the parameter will be recalled.

+ If Manual Timing is enabled (refer to "Manual Timing" on page 198), then the current time information in the

luminaires will be recalled. (For example, if focus has a time of 10 seconds and color has a time of 5 seconds,

then the luminaire will recall the parameters using those individual times.)

Note: The system assumes that data to be recalled is from a cue. As such, use of the <Cue> button is optional.

Recall stored cue data:

Step 1. Using Function Filter, select parameters to be recalled. (Refer to "Function Filter" on page 93.)

Step 2. If timing is desired, press [Man Time]. Recalled parameters will change in the luminaire’s current time

settings.

Step 3. Select channel(s) as required.

Step 4. Press [Recall] <Cue> [m] [Enter]. All stored data will be recalled from the specified cue (m) for the selected

luminaires, as dictated by the selections on the filters.

Recall stored preset data:

Step 1. Using Function Filter, select parameters to be recalled. (Refer to "Function Filter" on page 93.)

Step 2. If timing is desired, press [Man Time]. Recalled parameters will change in the luminaire’s current time

settings.

Step 3. Select channel(s) as required.

Step 4. Press [Recall] [Preset] [x] [Enter]

[Recall] Preset Palette Button. All stored data will be recalled from the

specified preset (x), as defined by the selections on the filters.

Undo a Delete Command

In addition to reversing Store and Update commands, the Undo feature can be used to reverse a Delete command.

Undo (reverse) a Delete command:

+ [Undo] [Store] [Enter] - reverses the last store/update/delete command.

(cue)

Undo Store

1 2 ... 272 273 274 275 276 277 278 279 280 281 282 ... 417 418

Sem comentários

Prg Vx76 User Manual 3.6 Manual do Utilizador Página 277