Prg OHM User Manual 1.12 Manual do Utilizador descarregar pdf (Página 19)

OHM™ LIGHT USER MANUAL 17

Navigation Within 'Maintenance' Menu

If any button is pressed, the current control screen will re-open.

This example shows the 2900K CCT control screen.

Note: When OHM is powered down via the mains, the MMI will switch OFF. When OHM is powered up, the fixture will

remember the last MMI settings: Intensity, CCT, DMX Mode and DMX Address.

DMX Controls

Once the DMX is connected to OHM via the 'DMX In' port, the fixture can be controlled by the DMX. The MMI will

display the DMX control screen as shown below:

[1] DMX Mode Setting: The 1st line displays current

DMX Mode.

[2] Current DMX Address: The 2nd line displays

current DMX Address.

[3] New DMX Address: The 3rd line displays a new

DMX Address, should the user want to change the

current DMX Address. The new address can be

altered by using the Rotary Knob.

[4] Black Button: Once the new DMX Address has

been altered via use of the Rotary Knob, the user

can confirm this change by selecting the Black

Button. This will change the Current DMX Address

to the value chosen in the New DMX Address.

[5] Red Button: This button and all others remain

inactive when connected to a DMX

Maintenance

SELECT

Maintenance

When the Maintenance option is selected, OHM functions in Maintenance Mode. This mode allows

the connection to the internal electronics via use of the Communications Port. Software updates will

be carried out when in this mode.

White CCT

2900K Studio

ON 100% DMX451 MENU

Mode = Standard

Current DMX 001

New DMX 003

SELECT

4 53

1 2

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26

Sem comentários

Prg OHM User Manual 1.12 Manual do Utilizador Página 19